Liste de contrôle de l'inspection de démarrage

Maison / Renseignements de démarrage / Liste de contrôle de l'inspection de démarrage

Liste de contrôle de l'inspection de démarrage

Facility Identification (Name):*

Address:*

Address (Line 2):

City:*

State/Prov: (USA and Canada only)

Postal Code:*

Country:*

S.U.I Test Date:*

Clarke Engine Model:*

Engine Manufacturer:*

Engine Serial Number:*

Manufacturer Serial Number:*

Pump Manufacturer:*

Pump Model:*

Pump Speed:*

Pump Pressure (PSI):*

Pump Rating (GPM):*

Controller Manufacturer:*

Controller Model:*

Right Angle Gear:*

Yes

Right Angle Gear Ratio:

Inspection Requirements

Engine Full Load RPM:*

Engine Oil Pressure at Full Load (PSI):*

Stabilized Engine Temp at Full Load (F):*

Check and Correct as Necessary

(Make necessary comments at bottom of form)

Static Checks (Pre Start-Up):*

Running Checks:*

Manual start at engine panel with fire pump controller in OFF position

Manual start at Fire Pump Controller with Engine Gauge Panel in automatic position

Water solenoid operation, verify raw water discharge

Cooling loop pressure gauge reading:

psi

Engine gauges functioning correctly

No leaks at fuel, water, exhaust

High coolant temperature alarm verification

Low coolant temperature alarm verification

Low oil pressure alarm verification

High raw water temperature alarm verification

Low raw water flow alarm verification

Use infrared temp-gun to measure and record engine damper temperature at full load HP

Temperature: °F °C

Overspeed shutdown using verification procedure

Clean Y-strainers in cooling loop after all testing is completed

Final hour meter reading:

Work Performed By:*

Warranty Registration for engine submitted online at www.clarkefire.com

For Electronic Engines Only:

With engine off, switch ECM Selector to Alternate ECM to verify alarm

Start engine in Alternate ECM, verify speed setting and no additional alarms

With engine off, switch ECM Selector to Primary ECM and start engine to verify normal operation

ECM Warning and Failure Alarm Verification

Pump Dealer Address:*

Pump Dealer Address (Line 2):

Pump Dealer City:*

Pump Dealer State/Prov: (USA and Canada only)

Pump Dealer Postal Code:*

Pump Dealer Country:*

Service Dealer Name:*

Service Dealer Address:*

Service Dealer Address (Line 2):

Service Dealer City:*

Service Dealer State/Prov: (USA and Canada only)

Service Dealer Postal Code:*

Service Dealer Country:*

Email Acknowledgement to:*

Email Copy of this Form to:

Recherche rapide du moteur